The most advanced lightsaber stand ! The Anti Gravity Saber Stand makes your saber float as if it was defying gravity. And with its front and back similar design, you can join 2 stands to make a double stand Imperial doorway with floating sabers.
It works with a magnetic puck that you insert in your emitter, in place of the blade. Attach the retention screw and voila!! No hideous magnetic block visible on the outside, here it's hidden.
Please read the details below for how to use it and saber compatibility.
IMPORTANT: this product is brand new and we expect a lot of demand. As production ramps up Nexus will not be able to serve everyone immediately but we are not making it a limited edition. Expect some delay when ordering it in the first weeks of release (August 2026). About 1 to 2 weeks additional production time.
The stand comes with:
- A scale to weigh your hilt and select the correct weight on the stand
- A USB power cable.
- Both 1" and 7/8" inch diameter magnetic pucks
Important limitations and tips for making it work:
- works with hilts under 1.2kg / 2.64lbs and 35cm / 13.7in in length (floating clearance)
- REMOVE THE ELECTRONICS CORE due to the strong magnetic interferences. For sabers with a slide-out core it's easy, for sabers with a fixed core, you'll have to remove the fixed core before displaying in the stand.
- Magnetic puck needs to be as close to the top as possible. Hilts with a low retention/attachement point and long guard pieces will not work (e.g: Cal's sabers, too long anyway). Same with odd shaped sabers (e.g: Snips rebel)
- Keep batteries, cores, phones, credit cards and other magnetic, metalic and electronic items AWAY from the stand when in power.
- The magnetic holder needs power to function. If power is cut the saber may fall. (technically the magnet will connect to the top, but it could fail to stick and fall)
- Strong magnets can damage easily when struck or falling, handle carefully.
- DO NOT TURN THE SABER ON. If the magnetic puck comes in contact with the neopixel pogo pins in your saber whilst it is powered on, it can short circuit.
LED and spin functions:
- Color dial selects the color, smoothly browsing through the RGB spectrum to select your favorite display color
- Last setting scrolls through all colors with a "breathing" transition effect
- Spin dial activate the spinning through a fan blowing air to turn the saber. Adjust the speed there.
- Weight dial adjusts the magnetic power depending on the weight of your hilt
Sabers not included, for illustration purposes only. Package weight is 4kg / 8.8lbs.
SEE IT IN VIDEO (coming soon)
Video demo coming soon (end of september) on the next Youtube digest
As always this is a NEW PRODUCT and until I have reviewed and demo it in my digest, the specs and functions are as described by the manufacturer, to be tested.
If you have any questions about our products feel free to reach out to us through the chat, we speak english and french.
